Engineering, 23.05.2020 04:01, soliseric879

An activated sludge system has a single aeration basin with a volume of 300,000 gal and 2 - 25 ft. diameter secondary clarifiers. The influent flow is 1.1 MGD and the influent BOD5 and TSS are 160 mg/L and 190 mg/L respectively. The mixed liquor suspended solids concentration is 2500 mg/L and the recycle suspended solids concentration is 6800 mg/L. The sludge recycle flow rate is 0.60 MGD and the solids residence time is 9 days. (1 gallon = 3.79L)
A. Calculate the volumetric BODs loading rate on the acration basin in units of lbs/1000 ft.
B. Calculate the F:M ratio in units of g-B0Ds/g-TSS.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, aliceohern

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

continue

Engineering, 04.07.2019 18:10, anna22684

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

continue

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Do you know the correct answer?

An activated sludge system has a single aeration basin with a volume of 300,000 gal and 2 - 25 ft. d...