Engineering, 22.05.2020 02:58, claaay1

2. Air enters the compressor of a simple gas turbine at 14 psia, 520 R and a volumetric flow rate of 10,000 CFM (ft3/min). The isentropic efficiencies of the compressor and turbine are 83% and 87% respectively. The compressor pressure ratio is 14 and the temperature at the turbine inlet is 2500 R. Based on a air-standard analysis, calculate (a) the thermal efficiency, (b) the net power developed in HP, and (c) the rate of entropy production in the compressor and turbine, in hp/R.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, demarcuswiseman

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

continue

Engineering, 04.07.2019 18:10, jesuslovesusall3

Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs

Answers: 2

continue

Engineering, 04.07.2019 18:20, rjone8429

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

continue

Engineering, 04.07.2019 18:20, cristykianpour

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

continue

Do you know the correct answer?

2. Air enters the compressor of a simple gas turbine at 14 psia, 520 R and a volumetric flow rate of...