Engineering, 21.05.2020 21:04, bakerj5203
An etchant was used to electively etch the grain boundaries. Mention whether these grain boundaries would appear brighter or darker after etching when observed through optical microscope and explain the reason for such appearance.
Answers: 3
Engineering, 03.07.2019 15:10, brooklyn674
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:10, demarcuswiseman
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:20, kodyclancy
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
An etchant was used to electively etch the grain boundaries. Mention whether these grain boundaries...
Mathematics, 16.11.2020 23:40
Mathematics, 16.11.2020 23:40
Mathematics, 16.11.2020 23:40
Physics, 16.11.2020 23:40
English, 16.11.2020 23:40
Mathematics, 16.11.2020 23:40
Spanish, 16.11.2020 23:40
Chemistry, 16.11.2020 23:40