Engineering, 20.05.2020 02:57, dodsonh16

For a Digital Muti-meter when set to the Diode Test, It will indicate continuity when the RED lead is connected to the Anode of a known good Diode and the black lead is connected to the Cathode (will show Forward voltage drop). When the leads are Reversed, there is no continuity indicated. With this knowledge, you know test an unknown transistor whose terminals are numbered #1,#2 and #3 and obtained the following result:

Red #1 #1 #2 #2 #3 #3
Black #2 #3 #1 #3 #1 #2
Result No Continuity, Continuity, No Continuity, Continuity, No Continuity, No Continuity

a) Is the Transistor Good or Bad?
b) Which terminals #1, #2 or #3 is the Base?
c) Is it PNP or NPN?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, heidiburgos1own6c0

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, colin774

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:10, jojoangelique13

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

continue

Do you know the correct answer?

For a Digital Muti-meter when set to the Diode Test, It will indicate continuity when the RED lead i...