Engineering, 07.05.2020 03:59, drippyc1363

The semiconductor is a homogeneous, p-type material in thermal equilibrium for t ≤ 0. The excess minority carrier lifetime is 10^-6 ns. At t = 0, an external source is turned on which produces excess carriers uniformly at rate of g'=1020 cm^-3s^-1. At t = 210^-6 s , the external source is turned off.

(a) Derive the expression for the excess-electron concentration as a function of time for 0 ≤ t ≤[infinity].

(b) Determine the value of excess electron concentration at (i) t = 0, (ii) t = 210^-6 s , (iii) t = 3*10^-6 s and (iv) t = [infinity].

(c) Plot the excess electron concentration as a function of time.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:20, 1230bering

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

continue

Engineering, 04.07.2019 18:20, RiverH246

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

continue

Do you know the correct answer?

The semiconductor is a homogeneous, p-type material in thermal equilibrium for t ≤ 0. The excess min...