Engineering
Engineering, 06.05.2020 05:36, katdoesart65091

Consider a 50 x 106 m3 lake fed by a polluted stream with a flow rate of 75 m3 /s and a pollutant concentration of 25.5 mg/L. There is also a sewage outfall that discharges 3.0 m3 /s of wastewater with a pollutant concentration of 125 mg/L. Stream and sewage wastes have a reaction rate coefficient of 5% per day. Find the steady-state (i. e., effluent) pollutant concentration and flow rate

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:20, samantha636
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
image
Engineering, 04.07.2019 18:20, rbgrh9465
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
image
Engineering, 04.07.2019 18:20, Doogsterr
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
image
Engineering, 04.07.2019 19:10, ultimateapes
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
Do you know the correct answer?
Consider a 50 x 106 m3 lake fed by a polluted stream with a flow rate of 75 m3 /s and a pollutant co...

Questions in other subjects: