Engineering
Engineering, 06.05.2020 03:45, mamas4539p79bw7

As a project manager of Very Good Construction you want to plan renting a fleet of 25 cu yd tractor-scrapers and have them hauling between the pit and a road construction job. The haul road is a rutted dirt road that deflects slightly under the load of the scraper. There is a slight grade of 2.5% from the pit to the fill location. Rolling resistance factor is assumed as 100 lbs/ton. The return road is effectively level. The haul distance to the dump location is 0.50 miles and the return distance is 1.50 miles. The scrapers are push loaded in the pit. The cycle time for the pusher is 1.50 minutes and the cycle time for the scrapers is 8 minutes. Assume that the weight on the wheels is 75 tons (full) and 50 tons.1. What are the rolling resistances and grade resistance?
2. What are the effective grades?
3. How many scrapers you recommend to be rented? Explain.
4. What is the production of the system in case 4 scrapers would be rented?

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, heidiburgos1own6c0
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
image
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
image
Engineering, 04.07.2019 18:10, nandalabella06
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
Do you know the correct answer?
As a project manager of Very Good Construction you want to plan renting a fleet of 25 cu yd tractor-...

Questions in other subjects:

Konu
Mathematics, 04.12.2019 18:31
Konu
Mathematics, 04.12.2019 18:31