Engineering, 05.05.2020 19:25, ineedhelp2285

A broad crested weir, 6 feet high, will be constructed in a rectangular channel 70’ feet wide. The weir crest extends a length of 70 feet between the banks with one 5-foot wide, square nosed piers (Kp = 0.02) in the channel and two 4 foot wide square abutments (Ka = 0.2). The width of the weir crest is 3 feet. If H = 2’, determine the design discharge for the weir. Please neglect the approach velocity in your calculation of HT for the effective length. Use the equation from class to calculate Cd in order to obtain the most precise answer.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, genyjoannerubiera

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

continue

Do you know the correct answer?

A broad crested weir, 6 feet high, will be constructed in a rectangular channel 70’ feet wide. The w...