Engineering, 05.05.2020 02:43, anispotts

LC3 Programming ProblemUse .BLKW to set up an array of 10 values, starting at memory location x4000, as in lab 4.Now programmatically populate the array with the numbers 0 through 9 – i. e. hard-code just the firstvalue (0), then calculate the rest one at a time, storing them in the array as you go. After you've stored them all, grab the seventh value (which would be 6) and store it in R2.As always, step through your program and examine the values as they are stored in the array, andexamine the final value stored in R2, to make sure your program works as expected.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, settasav9641

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

continue

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:10, aaliyah80

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

continue

Do you know the correct answer?

LC3 Programming ProblemUse .BLKW to set up an array of 10 values, starting at memory location x4000,...