Engineering, 05.05.2020 04:15, mommer2019

Wastewater from a primary treatment tank is to undergo secondary treatment in an activated sludge unit. The following data and operational parameters are specified: Two identical units are designed to operate in parallel and to process a combined wastewater flow rate of 0.5 m3 /s; the BOD5 of the effluent suspended solids is 70% of the allowable suspended solids concentration. Assume ideal operation of the reactor units. (a) If the EPA’s secondary treatment standards (average monthly) are to be met. How large must each reactor be (m3 )?

Answers: 3

Show answers

Answers

answered: rb161040

Complete Question

The complete question is shown on the first uploaded image

The volume of each reactor is $V= 691.53\ m^3$

The rate at which cells must be discharged in the unit is R = 1002.22 kg/day

Explanation:

From the question we are told that

The water flow rate of the units is $\r q = 0.5 m^3/s$

The BOD_5 (Biochemical oxygen demand) of the effluent suspended solid is S = 70 % of allowable suspended solid concentration

Given that the flow rate for two identical parallel units then for a single unit the flow rate would be

$Q = \frac{\r q}{2} = \frac{0.5}{2} = 0.25 m^3 /s$

Generally the required BOD in terms of EPA(Effluent Guidelines) is concerned is S_e = 30 mg/l

Now Sludge age of this unit of reactor is mathematically evaluated from this expression

$S_e = \frac{k_s (1 + k_d \theta_c)}{\theta_c (\mu_m - k_d) - 1}$

Where $\theta_c$ is the Sludge age

Substituting values

$30 = \frac{30 (1 + 0.05 \theta_c)}{\theta_c (3 - 0.05) - 1}$

$30 = \frac{ 30 + 1.5\theta_c)}{( 3 \theta_c - 0.05 \theta_c) - 1}$

=> $\theta _ c = 0.69 \ days = 59616s$

Now the volume of the reactor is mathematically evaluated from this relation

$VX = \frac{\r q Y (S_o - S) \theta_c} {1 - k_d \theta_c}$

Making V the subject of the formula

$V = \frac{\r q Y (S_o - S) \theta_c} {1 - k_d \theta_c} * \frac{1}{X}$

Substituting values

$V = \frac{0.25 * 4 (150 - 30 ) * 59616 }{1+ 0.05 * 0.69} * \frac{1}{1000}$

=> $V= 691.53\ m^3$

We can obtain the cell mass been wasted per day using this expression

$Q_w X_i = (\frac{VX}{\theta _c})kg /day$

Where Q_w is given as $Q_w = 10 L/s = 10 *10^{-3} \ m^3 /s$

Q_w X_i is the sludge been wasted per day

X_i is the discharge concentration for each unit

Substituting values

$X_i Q_w = \frac{1002.22}{86400}$

$X_i = \frac{1002.22}{86400} * \frac{1}{10*10^{-3}}$

Now the rate at which they discharge this concentration is mathematically evaluated as

R = X_i * Q_w * 86400

substituting values

R = 1002.22 kg/day

Wastewater from a primary treatment tank is to undergo secondary treatment in an activated sludge un

answered: Guest

Diene d fbfjcnfd ebjjn

answered: Guest

answer:

d. attempt to find the owner, then leave your information if you cannot find them.

explanation:

d. represents both (b) and (c).

more logical as well.

b and c are to complicated.

glad i could , give me a follow, so if you need with any other question, im here.

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, lerasteidl

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:10, juansoto227711

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

continue

Do you know the correct answer?

Wastewater from a primary treatment tank is to undergo secondary treatment in an activated sludge un...