Engineering, 05.05.2020 04:09, diegocazador67

You are asked to select a bearing.
The radial force on the bearing is estimated as 300 lbf. The rotation speed of the shaft is to be 500 rpm and the life to be 45 kh with a reliability of 0.95.
a) What is the C10 catalog entry (in lbf) to be sought when searching for a deep-groove bearing in a manufacturer's catalog on the basis of one million revolutions for raiting life?
Use the Weibull parameters: x0 = 0.02, (θ- x0) = 4.4, and b = 1.5. Also use an application factor of 1.25.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, settasav9641

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:20, samantha636

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

continue

Do you know the correct answer?

You are asked to select a bearing.
The radial force on the bearing is estimated as 300 lbf. T...