Engineering, 05.05.2020 07:31, zfismael

Cubic shape gel beads of 8 mm on a side contains residual solvent from the gel-casting process. Initially the bead contains 0.20 % of residual solvent uniformly distributed within the polymer. The residual solvent will be removed from the bead by drying the beads in a fluidized bed of fresh air. The air flow though the fluidized bed is very high so that convective mass transfer resistance is negligible (i. e. Kc is extremely high). a. What is the residual concentration at the surface of the bead after 50 hrs? Use, DAB = 4X10-7 cm2 /s. b. If this geometry is approximated as a semi-infinite medium, how long it will take for the solvent to reach 0.18% composition at a depth of 0.1 mm from the surface of the bead. Please solve taking the system as a semi-infinite medium

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:10, leomessifanboy678

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

continue

Do you know the correct answer?

Cubic shape gel beads of 8 mm on a side contains residual solvent from the gel-casting process. Init...