The beam supports the load of P = 9kip. As a result, the A992 steel (E = 29 × 103ksi) member BC is subjected to a compressive load. Due to the forked ends on the member, consider the supports at B and C acts as pins for x-x axis buckling and as fixed supports for y-y axis buckling. Determine the factor of safety with respect to buckling about each of these axes.

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater