Engineering, 05.05.2020 08:20, TrudnEli1217

Design an optimal pyramidal horn for optimum operation at 1 GHz and a gain of 15.45 dB. It is connected to WR975 waveguide with a=9.75 in = 24.765 cm and b=4.875 in. = 12.3825 cm. Also determine the half-power bandwidths in the E- and H- planes. Give all dimensions in cm. Check to make sure your design has the correct optimum phase delay in the E- and H- planes (s=1/4, t=3/8)

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 18:10, sarahgrindstaff123

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Do you know the correct answer?

Design an optimal pyramidal horn for optimum operation at 1 GHz and a gain of 15.45 dB. It is connec...