Engineering, 05.05.2020 08:00, nickonicyetlan
Steam enters a turbine operating at steady state at 2 MPa, 323 °C with a velocity of 65 m/s. Saturated vapor exits at 0.1 MPa and a velocity of 42 m/s. The elevation of the inlet is 4 m higher than at the exit. The mass flow rate of the steam is 7 kg/s, and the power developed is 8 MW. Let g = 9.81 m/s2. Determine the rate of heat transfer between the turbine and its surroundings, in kW.
Answers: 2
![\dot Q_{out} = \left(8\,\frac{kg}{s} \right)\cdot \left\{3076.41\,\frac{kJ}{kg}-2675.0\,\frac{kJ}{kg}+\frac{1}{2}\cdot \left[\left(65\,\frac{m}{s} \right)^{2}-\left(42\,\frac{m}{s} \right)^{2}\right] + \left(9.807\,\frac{m}{s^{2}} \right)\cdot (4\,m) \right\} - 8000\,kW](/tpl/images/0635/1304/c9342.png)
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, tjeffers90028
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 06.07.2019 02:30, onlymyworld27
In a unit cell of fcc structure, indicate the position of one of the tetrahedral interstitial sites by plotting the corresponding tetrahedron. do the same for one of the octahedral interstitial sites (in a separate fcc unit cell). mark the positions of all the tetrahedral and octahedral interstitial sites in the unit cells. how many equivalent tetrahedral sites and how many equivalent octahedral sites are contained in a fcc unit cell, respectively. what is the coordination number for a tetrahedral site and what is the coordination number for an octahedral site?
Answers: 2
Engineering, 06.07.2019 02:30, josediaz1124
Around steel bar, made from material with a yield stress of 750mpa, is loaded so that it has stresses co locations of maximum normal stress and maximum shear stress. use maximum shear stress and maximum distortion energy theories to calculate the safety factors for initial yielding failures.
Answers: 3
Do you know the correct answer?
Steam enters a turbine operating at steady state at 2 MPa, 323 °C with a velocity of 65 m/s. Saturat...
Questions in other subjects:
Health, 26.05.2021 21:50
Mathematics, 26.05.2021 21:50
Mathematics, 26.05.2021 21:50
History, 26.05.2021 21:50
