Engineering, 05.05.2020 09:20, whocares1234

Work and heat transfer calculation in a closed system

Find the pressure, temperature and volume at the end of each of the four processes. Then calculate the work done during each process and the net amount of work done. Finally calculate the net amount of heat transfer comparing the very initial and the very final states.

Nitrogen T1 (°C): 90, P1 (kPa): 530, m(kg): 9.3

process1: Isobaric expansion and the volume increased by 70%

process2: Isothermal expansion to a pressure of 10% of the initial pressure.

process3: Polytrpic comprission with n = 1.2 to the same initial process.

process4: Isochoric cooling to reach a pressure equal to 40% of the initial pressure

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, ashleybaber4966

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

continue

Engineering, 04.07.2019 18:10, bckyanne3

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Do you know the correct answer?

Work and heat transfer calculation in a closed system

Find the pressure, temperature and...