Engineering, 05.05.2020 17:35, TayanaB

An induced-draft cooling tower cools 90,000 gallons per minute of water from 84 to 68oF. Air at 14.61 psia, 70oF dry bulb and 60oF wet bulb enters the tower and leaves saturated at 80oF. Find (a) the volume flow rate of air in cubic feet per minute, and (b) the makeup water required, in lbm/hr.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, yasyyas646646

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

continue

Engineering, 06.07.2019 04:10, idjfjcjs584

Along steel shaft of 10 cm diameter is austenised at 870°c and then quenched in a liquid at 30oc. the average surface heat transfer coefficient is 2000 w/m2. °c. the relevant thermophysical properties of the shaft are: p=7800 kg/m", k=20 w/mk, cp=0.46 kj/kg. k calculate: a)-the time required for the center temperature to drop to 200°c. b)-the temperature at half-radius at that moment. c)-the amount of heat that had been transferred to the liquid by that time per meter length of the shaft

Answers: 1

continue

Engineering, 06.07.2019 04:30, jess2652

Calculate the equilibrium concentration of vacancies per cubic meter in pure aluminum at 500°c. assume that the energy of formation of a vacancy in pure aluminum is 0.76 ev. what is the vacancy fraction at 650°c.

Answers: 3

continue

Engineering, 06.07.2019 05:20, hickslily9

Two kg of refrigerant 134a contained in a piston-cylinder assembly is initially at 4 bar and 70°c. the refrigerant undergoes a constant pressure process to a final state of a saturated vapor. kinetic and potential energy effects can be neglected. a) show the process on a pv diagram b) determine the work for the process, in kj c) determine the heat transfer during the process, in kj

Answers: 3

continue

Do you know the correct answer?

An induced-draft cooling tower cools 90,000 gallons per minute of water from 84 to 68oF. Air at 14.6...