Engineering, 05.05.2020 19:09, Blbyrd1679
You need to display output for all of the values between the starting and ending values. First two values are temperatures in Fahrenheit. You need to display all of the values from the first temperature to the last temperature. You increment from one temperature to the next by the increment value (the third value you read in). You need to convert these temperatures to Celsius and Kelvin. You need to output the temperatures as Fahrenheit, Celsius, and Kelvin. The numbers should be 18 characters wide with 4 digits of precision and need to be in fixed format. Do not use tab characters (\t) to output the values.
Answers: 3
Engineering, 04.07.2019 18:10, abdirahmansoloman
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
Engineering, 04.07.2019 19:10, Calliedevore
The proportional limit is always greater than the yield strength for a material. a)-trune b)- false
Answers: 3
Engineering, 04.07.2019 19:20, dndndndnxmnc
The process in which the system pressure remain constant is called a)-isobaric b)-isochoric c)-isolated d)-isothermal
Answers: 3
Engineering, 05.07.2019 23:20, neisha2507
Which one of the following faults cause the coffee in a brewer to keep boiling after the brewing cycle is finished? a. an open circuit in the heating element b. a short circuit at the terminals c. welded contacts on the thermostat d. a leak around the gasket
Answers: 3
You need to display output for all of the values between the starting and ending values. First two v...
English, 17.07.2019 19:00