Engineering
Engineering, 05.05.2020 20:59, kidward

Weir, upstep and jump
Water with depth y1 flows over a broad-crested weir with height P (where the water depth above the BCW is y2) in a horizontal rectangular channel. Directly downstream of the weir, the channel bottom rises by an amount d above the original channel bottom (d > P) and the water depth becomes y3 and the Froude number F3=2. Further downstream, a hydraulic jump occurs where the water depth becomes y4. If y1 is twice y2, find:
a) Froude number upstream of the weir F1
b) y3/y1
c) d/y2
d) y4/y1
e) P/y1

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, brooklyn674
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
image
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
image
Engineering, 04.07.2019 16:10, Arealbot
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
image
Engineering, 04.07.2019 18:10, koolgurl2003
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
Do you know the correct answer?
Weir, upstep and jump
Water with depth y1 flows over a broad-crested weir with height P (where...

Questions in other subjects: