Engineering
Engineering, 05.05.2020 23:19, tddreviews

PokerHandEvaluator. javaThis class consists of several static methods that you will write. The prototypes for the methods are:public static boolean hasPair(Card[] cards)public static boolean hasTwoPair(Card[] cards)public static boolean hasThreeOfAKind(Card[] cards)public static boolean hasStraight(Card[] cards)public static boolean hasFlush(Card[] cards)public static boolean hasFullHouse(Card[] cards)public static boolean hasFourOfAKind(Card[] cards)public static boolean hasStraightFlush(Card[] cards)The parameter for each of these methods will be an array of exactly 5 cards. Each method will return true or false, based on whether or not the given set of cards satisfies the poker hand being evaluated in the method. For example, the hasTwoPair method will return true if the set of cards has two pairs of different values (e. g. a pair of 4's and a pair of Jacks). If you need to review the various "poker hands" being tested in the methods, please take another look at the Poker Hand Page. Important: Each of these methods checks whether or not the set of cards satisfies the given poker hand, but it does not care if it could also satisfy a better hand. For example, if the current hand isthen the results of calling each method should be as indicated below:hasPair -- true (there is at least one pair)hasTwoPair -- true (there are two pairs of distinct values)hasThreeOfAKind -- true (there are three Aces)hasStraight -- falsehasFlush -- falsehasFullHouse -- true (there are three Aces and two Jacks -- that makes a "full house")hasFourOfAKind -- falsehasStraightFlush -- falseImportant: In order for a hand to qualify as "Two Pair", it must have two pairs of distinct values -- in particular, having four-of-a-kind does not also count as two pair. For example, if the current hand is<2 of diamonds, 2 of spades, 2 of hearts, 2 of clubs, 9 of spades>then the results of calling each method should be as indicated below:hasPair -- true (there is at least one pair)hasTwoPair -- false (there are not two pairs of distinct values)hasThreeOfAKind -- true (there are three 2's)hasStraight -- falsehasFlush -- falsehasFullHouse -- falsehasFourOfAKind -- true (there are four 2's)hasStraightFlush -- false

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, meganwintergirl
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
image
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
image
Engineering, 04.07.2019 18:10, mirmir62
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
image
Engineering, 04.07.2019 18:20, AnonymousLizard52303
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
Do you know the correct answer?
PokerHandEvaluator. javaThis class consists of several static methods that you will write. The proto...

Questions in other subjects:

Konu
Mathematics, 12.11.2020 22:10
Konu
Mathematics, 12.11.2020 22:10