Engineering, 06.05.2020 04:07, emm3456
Give the characteristic values of the input noise generators of an amplifier with amplification of 100 if, at grounded input, the output noise is characterized in the catalog as 5 microVolt/Hz0.5 ; and, with 100 kOhm generator resistance, the output noise is 500 microVolt/Hz0.5 , at the following extra condition:
1. Suppose that the input impedance is infinite.
2. Suppose that the input impedance is 100 kOhm.
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10, anna22684
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Do you know the correct answer?
Give the characteristic values of the input noise generators of an amplifier with amplification of 1...
Questions in other subjects:
Mathematics, 30.06.2021 17:30
