Engineering, 06.05.2020 05:02, noemir42

A vertical piston-cylinder assembly contains argon. The piston has a mass of mass 25 kg and a face area of 0.005 m2. The mass of argon is 2.5 g, and initially the argon occupies a volume of 2.5 liters. The atmosphere exerts a pressure of 100 kPa on the top of the piston. During a process, the volume of the argon slowly decreases to 0.001 m3 as energy with a magnitude of 1 kJ is slowly removed by heat transfer. Determine the change in the specific internal energy of the argon, in kJ/kg, for this process. Assume the following:

a. g = 9.81 m/s^2
b. friction between the piston and the cylinder wall is negligible.
c. the change in the potential energy of the argon is negligible.
d. the change in the kinetic energy of the argon is negligible.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, maustin5323

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

continue

Engineering, 04.07.2019 18:20, karatsgrande3772

Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t

Answers: 3

continue

Engineering, 04.07.2019 18:20, kendrawalraven

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Answers: 3

continue

Engineering, 04.07.2019 18:20, rbgrh9465

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.

Answers: 3

continue

Do you know the correct answer?

A vertical piston-cylinder assembly contains argon. The piston has a mass of mass 25 kg and a face a...