Engineering, 26.04.2020 13:48, putaprincess16
Food is dried in a co-current dryer from an inlet moisture content of 0.3 kg moisture per kg product to an outlet moisture content of 0.15 kg moisture per kg product. Air at dry bulb temperature 30oC and RH 40% is heated to the dryer inlet temperature 110oC. The dry bulb temperature of the exhaust air from the dryer should be at least 10oC above the dew point to prevent condensation in pipework. Calculate the exhaust air temperature and RH that meet this requirement and the mass of air required (kg/ h (dry basis) per kg/ h of dry solids).
Answers: 1
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:20, hayleymckee
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Do you know the correct answer?
Food is dried in a co-current dryer from an inlet moisture content of 0.3 kg moisture per kg product...
Questions in other subjects:
Social Studies, 17.09.2021 14:00
Health, 17.09.2021 14:00
Biology, 17.09.2021 14:00
