Engineering, 26.04.2020 11:45, addiemaygulley2835
Find the Mechanical Advantage and the maximum separation load for a wedge (length = 6 inches and height = 3 inches) used to split a piece of wood.
The effort load applied is 80 lb.
Answers: 2
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Find the Mechanical Advantage and the maximum separation load for a wedge (length = 6 inches and hei...
Mathematics, 24.03.2020 19:50
Mathematics, 24.03.2020 19:50
Engineering, 24.03.2020 19:50
Mathematics, 24.03.2020 19:51