A 4-arm bridge network, adjusted to balance conditions, consists of; arm
AB a standard resistor...
Engineering, 25.04.2020 12:05, Monte86
A 4-arm bridge network, adjusted to balance conditions, consists of; arm
AB a standard resistor known to be within 0.1% of 100 ohms arm BC a
variable condenser adjusted to 0.362uF in parallel with a variable resistor
adjusted to 2380 ohms. arm CD a standard resistor known to be within 0.1% of
1uohms. arm DA a coil of inductance L and series loss resistance R. Evaluate
L and R, deriving the equations used. Determine the maximum percentage
error that can be tolerated in each of the variable components if L is to be
determined to within 0.5% and R to within 1% of the correct value. If the
variable components are known to be accurate within the limits so
determine how accurately is the ratio L/R known.
Answers: 3
Engineering, 04.07.2019 12:10, Ryantimes2
On a average work day more than work place firs are reorted
Answers: 1
Engineering, 04.07.2019 18:10, skpdancer1605
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Mathematics, 05.07.2019 09:30
Chemistry, 05.07.2019 09:30
History, 05.07.2019 09:30
English, 05.07.2019 09:30
Chemistry, 05.07.2019 09:30