Engineering
Engineering, 25.04.2020 01:46, crazylogic5094

An ornamental fountain in a large open plaza surrounded by buildings squirts water highinto the air. On gusty days, the wind blows spray from the fountain onto passersby. Thewater-flow from the fountain is controlled by a mechanism linked to an anemometer (whichmeasures wind speed and direction) located on top of an adjacent building. The objectiveof this control is to provide passersby with an acceptable balance between an attractivespectacle and a soaking: The harder the wind blows, the lower the water volume and heightto which the water is squirted, hence the less spray falls outside the pool area. Your task is to devise an algorithm which uses data provided by the anemometer to adjustthe water-flow from the fountain as the wind conditions change

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
image
Engineering, 04.07.2019 18:10, winterblanco
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
image
Engineering, 04.07.2019 18:10, agpraga23ovv65c
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
image
Engineering, 04.07.2019 19:20, brae72
Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?
Answers: 1
Do you know the correct answer?
An ornamental fountain in a large open plaza surrounded by buildings squirts water highinto the air....

Questions in other subjects:

Konu
Mathematics, 28.04.2021 04:40
Konu
Spanish, 28.04.2021 04:40
Konu
Biology, 28.04.2021 04:40