Engineering, 24.04.2020 23:04, brevenb375
The drop in the temperature of molten aluminum when it flows through a 20 cm long round, water-cooledchannel is 40 C. What will be the temperature drop if aluminum were to flow through a 20 cm long channel of half-round (semi-circular) cross-section? Assume the mold material, mold and metal temperatures, and radius of the flow channels to be identical in the two cases.
Answers: 2
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20, safiyabrowne7594
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
Engineering, 04.07.2019 19:10, Destinationz
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
Engineering, 04.07.2019 19:10, lexie223
Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.
Answers: 2
The drop in the temperature of molten aluminum when it flows through a 20 cm long round, water-coole...
Advanced Placement (AP), 07.12.2021 05:20
Mathematics, 07.12.2021 05:20
Mathematics, 07.12.2021 05:20
Mathematics, 07.12.2021 05:20
Mathematics, 07.12.2021 05:20
Mathematics, 07.12.2021 05:20
History, 07.12.2021 05:20
Social Studies, 07.12.2021 05:20