Engineering, 24.04.2020 19:58, harleymustangs4992
How long should the shafts remain in the furnace to achieve a desired centerline temperature of 800K? 2) Determine the temperature gradient in the shaft at the outer surface of the shaft at the initial time when the steels enter the furnace? Note, the r coordinate extends along the direction from the center to outside.
Answers: 3
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10, niicoleassssssf
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10, katelynn73
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Do you know the correct answer?
How long should the shafts remain in the furnace to achieve a desired centerline temperature of 800K...
Questions in other subjects:
Mathematics, 11.07.2021 23:40
Engineering, 11.07.2021 23:40
Chemistry, 11.07.2021 23:40
Chemistry, 11.07.2021 23:40
