Engineering, 24.04.2020 19:37, sarita59

We would like to bolt the cantilevered beam to the column using a bolt pattern with two bolts. We are considering two possibilities: The bolts will be arranged in-line vertically, 5 inches apart, centered in the 6x6 in box, or, the bolts will be arranged in-line horizontally, 5 inches apart, centered in the 6x6 in box. Determine if one of the arrangements is preferable. Prove your point. You can do this by calculating the worst shear stress on a bolt in each case and selecting the case with the lesser shear stress.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, dval1146

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

continue

Engineering, 04.07.2019 19:10, gabigalvis1091

What is the main objective of using reheat rankine cycle?

Answers: 3

continue

Engineering, 04.07.2019 19:10, phantomlizz3233

In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?

Answers: 3

continue

Do you know the correct answer?

We would like to bolt the cantilevered beam to the column using a bolt pattern with two bolts. We ar...