Engineering, 24.04.2020 01:17, veronicatrejoaguiler
A closed system undergoes a process in which work is done on the system and the heat transfer Q occurs only at temperature Tb. For each case, determine whether the entropy change of the system is positive, negative, zero, or indeterminate.(a) internally reversible process, Q > 0.(b) internally reversible process, Q = 0.(c) internally reversible process, Q < 0.d) internal irreversibilities present, Q > 0.(e) internal irreversibilities present, Q = 0.(f) internal irreversibilities present, Q < 0.
Answers: 1
Engineering, 04.07.2019 18:10, tobyhollingsworth178
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 06.07.2019 02:30, chickennbutt0730
On solidification from a melt, the polymer polyethylene forms a semi-crystalline spherulite structure. (i) sketch an individual spherulite and label the amorphous and crystalline regions. (ii) draw a schematic to show the changes in specific volume with temperature during cooling from the melt, comparing it to the theoretical extremes of fully crystalline and fully amorphous (indicate tm and tg)
Answers: 2
A closed system undergoes a process in which work is done on the system and the heat transfer Q occu...
Mathematics, 21.10.2019 15:30
Physics, 21.10.2019 15:30
Mathematics, 21.10.2019 15:30
Spanish, 21.10.2019 15:30
History, 21.10.2019 15:30