Engineering, 23.04.2020 17:58, maddi4753

A fire hose has a diameter of 3 inches, and it has a nozzle that reduces to a diameter of 1.125 inches. The nozzle is held in place by a coupling to the hose. The hose is delivering a discharge of 250 gallons/minute. The pressure just upstream of the nozzle is 45 psi. The horizontal anchoring force required to hold the horizontal nozzle in place in lbs is most nearly p=45 psi Dz=1.125 in.

(a) 75
(b) 245
(c) 320
(d) 395

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, makaylashrout77

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

continue

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Do you know the correct answer?

A fire hose has a diameter of 3 inches, and it has a nozzle that reduces to a diameter of 1.125 inch...