Engineering, 23.04.2020 14:54, harringtonrob16

63 + 216 Ω⁄∅ empedansına sahip dengeli Δ bağlı bir yük 50∠0° Ω⁄∅
empedansına sahip dengeli bağlı bir yüke parallel bağlıdır. Paralel yükler 1 + 3 Ω⁄∅ empedansına sahip
bir hattan beslenmektedir. bağlı yükün hattan nötr’e geliminin büyüklüğü 750 ’tur.
a) Yükleri besleyen hattaki akımın büyüklüğünü hesaplayınız?
b) Hattın gönderici ucundaki faz geriliminin büyüklüğünü hesaplayınız?
c) Kaynaklar tarafından sağlanan toplam görünür, ortalama ve reaktif güçleri bulunuz?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 04.07.2019 18:10, bckyanne3

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

continue

Engineering, 04.07.2019 18:10, caitlynnpatton1208

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

continue

Do you know the correct answer?

63 + 216 Ω⁄∅ empedansına sahip dengeli Δ bağlı bir yük 50∠0° Ω⁄∅
empedansına sahip dengeli bağ...