Engineering
Engineering, 22.04.2020 04:52, ciarrap552

6msection of 150lossless line is driven by a source with vg(t) = 5 cos(8π × 107t − 30◦ ) (V) and Zg = 150 . If the line, which has a relative permittivity r = 2.25, is terminated in a load ZL = (150 − j50) , determine: (a) λ on the line. ∗ (b) The reflection coefficient at the load. (c) The input impedance. (d) The input voltage Vi. (e) The time-domain input voltage vi(t).

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, ahmedeldyame
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
image
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
image
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
image
Engineering, 04.07.2019 18:10, jojoangelique13
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Do you know the correct answer?
6msection of 150lossless line is driven by a source with vg(t) = 5 cos(8π × 107t − 30◦ ) (V) and Zg...

Questions in other subjects:

Konu
Social Studies, 16.10.2019 02:30
Konu
Biology, 16.10.2019 02:30