Engineering, 22.04.2020 04:26, 82coogs
Assume gears are readily available in face-width increments of 0.5 in (i. e. 2.0 in, 2.5 in. 3.0 in, 3.5 in.), with face widths in the range of three to five times the circular pitch. Specify a diametral pitch and face width such that the minimum WEAR factor of safety for the pinion is equal to 1.3.
Answers: 2
Engineering, 03.07.2019 14:10, bryneosburn
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:10, genyjoannerubiera
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Assume gears are readily available in face-width increments of 0.5 in (i. e. 2.0 in, 2.5 in. 3.0 in,...
Physics, 07.10.2019 16:30