Engineering, 22.04.2020 00:56, nique1024
What horsepower must be supplied to the water to pump 3 cfs at 68°F from the lower to the upper reservoir? Assume that the head loss in the pipe is given by hL=0.018(L/D)*(V2/2*g) where L is the length of pipe, D is dimeter of the pipe and V is velocity in the pipe. Moreover, there is sudden-expansion head loss in the system that can be calculated by V2/2*g. Sketch HGL and EGL. (20 pts)
Answers: 1
Engineering, 04.07.2019 18:10, QueenLife4869
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20, CelesteN64
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
Engineering, 04.07.2019 18:20, rjone8429
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
What horsepower must be supplied to the water to pump 3 cfs at 68°F from the lower to the upper rese...
History, 28.08.2019 04:30
English, 28.08.2019 04:30
Geography, 28.08.2019 04:30
Mathematics, 28.08.2019 04:30
Mathematics, 28.08.2019 04:30
Mathematics, 28.08.2019 04:30