2.) For a 20‐mm‐diameter tube with either water or unused engine oil flowing through it, find: a.)The mean velocity, hydrodynamic entry length, and thermal entry length for each of the fluids with a temperature of 300 K if the mass flow rate is 0.01 kg/s. b.)The mass flow rate, hydrodynamic entry length, and thermal entry length for each fluid at 400 K and a mean velocity of 0.02 m/s.

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false

Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.