The blower in the system has a 4 hp motor (fully loaded at cooling design point) with a motor efficiency of 70% located AFTER the cooling coil. Find the required temperature leaving the cooling coil to maintain room conditions. Assume all of the energy used by the blower is converted to heat. What is total cooling coil load at the design point, including the blower heat

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false