Engineering, 21.04.2020 20:36, ernestsbaby6181
The n-p-n BJT has the following doping levels in the E, B and C: NDe = 1.8 e19 cm^-3, NAb = 1.7 e17 cm^-3, NDc = 4.5 e15 cm^-3. The electron drift velocity in the collector depletion region, vs = 1e7 cm/s. The intrinsic electron concentration in Si is 1e10 cm^-3. The relative dielectric permittivity of Si is 11.7. Find the collector depletion region delay time if the collector - base voltage is Vcb = 9 V. (Units: ps)
Answers: 1
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 19:10, LadyHolmes67
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
Engineering, 04.07.2019 19:10, kelseiroll9759
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
The n-p-n BJT has the following doping levels in the E, B and C: NDe = 1.8 e19 cm^-3, NAb = 1.7 e17...
Mathematics, 24.05.2021 15:40
Computers and Technology, 24.05.2021 15:40
Mathematics, 24.05.2021 15:40