Engineering, 21.04.2020 20:25, monnicawilliam
Water in a household plumbing system originates at the neighborhood water main where the pressure is 480 kPa, the velocity is 5 m/s, and the elevation is 2.44 m. A 19-mm (3/4-in) copper service line supplies water to a two-story residence where the faucet in the master bedroom is 40 m (of pipe) away from the main and at an elevation of 7.62 m. If the sum of the minor-loss coefficients is 3.5, estimate the maximum (open faucet) flow. How would this flow be affected by the operation of other faucets in the house?
Answers: 2
Engineering, 04.07.2019 18:10, viicborella
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 19:20, mariahmimibrooks
Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.
Answers: 2
Water in a household plumbing system originates at the neighborhood water main where the pressure is...
Mathematics, 04.11.2021 09:50
Mathematics, 04.11.2021 09:50
English, 04.11.2021 09:50
Mathematics, 04.11.2021 09:50