Engineering, 21.04.2020 16:10, clmorcutt420

A horizontal, opaque surface at a steady-state temperature of 80°C is exposed to an airflow having a free stream temperature of 25°C with a convection heat transfer coefficient of 20 W/m2 ·K. The emissive power of the surface is 628 W/m2 , the irradiation is 1380 W/m2 , and the reflectivity is 0.30.
Determine the absorptivity of the surface.
Determine the net radiation heat transfer rate for this surface. Is this heat transfer to the surface or from the surface?
Determine the com-bined heat transfer rate for the surface. Is this heat transfer to the surface or from the surface?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, lillygrl100

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

continue

Engineering, 04.07.2019 18:10, colin774

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:10, samanthabutryn

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

continue

Engineering, 04.07.2019 18:10, mamasbug4285

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

continue

Do you know the correct answer?

A horizontal, opaque surface at a steady-state temperature of 80°C is exposed to an airflow having a...