Engineering
Engineering, 20.04.2020 19:23, aidentrooper8629

The rainfall rate in a certain city is 20 inches per year over an infiltration area that covers 33000 acres. Twenty percent of the rainfall percolates into the groundwater, with the remaining 80% running off into the river. The city uses 83000 acre-ft per year, some of which comes from the river and the remainder from groundwater. The groundwater volume of fresh water is currently at 1.1 × 105 acre-ft and is expected to last for 30 years before being completely depleted of fresh water (assume uniform withdrawal each). Assuming the groundwater lasts exactly as expected, determine the rate at which water is being withdrawn from the river by the city.

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, makaylashrout77
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
image
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
image
Engineering, 04.07.2019 18:20, ashleyjaslin
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
image
Engineering, 04.07.2019 18:20, dlr1628
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
Do you know the correct answer?
The rainfall rate in a certain city is 20 inches per year over an infiltration area that covers 3300...

Questions in other subjects:

Konu
French, 12.03.2021 17:20