Engineering, 20.04.2020 21:08, nestergurl101

3. A large dynamometer operates a pump that circulates a viscous fluid through a restrictive fluid circuit. Under steady operating conditions, heat loss from the fluid is measured as 150 kW when the shaft is rotating at 1000 rpm, and 275 kW when the shaft speed increases to 2000 rpm. The pump efficiency varies with speed according to the equation:

n. = 0.85-5x10 where Ω is the shaft speed in ipm and n=P out/ P in.

Find the shaft power (in kW) and torque (in N-m) at both shaft speeds. Hint: Assume the heat loss rate in the fluid is due only to friction created by the pumping power.

the efficiency at both shaft speeds, and then the shaft power. From the shaft power and shaft speed, you can find the shaft torque at both speeds.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 03:10, lauriepdx17

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

continue

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

Engineering, 04.07.2019 18:10, leomessifanboy678

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

continue

Engineering, 04.07.2019 18:10, nandalabella06

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

continue

Do you know the correct answer?

3. A large dynamometer operates a pump that circulates a viscous fluid through a restrictive fluid c...