Engineering
Engineering, 19.04.2020 02:26, natalie9316

At high altitudes, mountaineers cannot absorb a sufficient amount of O2 in your flows blood to maintain a high level of activity. a pressure of 1 bar, the blood is typically saturated at 95% O2 but at 18,000 feet where the pressure is 0.50 , the corresponding degree of saturation is 71%. Assuming that Henry's law constant for blood is the same as for water, calculate the amount of O dissolved in 1.00 L of blood for pressures of 1 bar and Pub. Air contains 20.99% O2 in volume. Suppose the density of blood is 998 kg m -3

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, bryneosburn
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
image
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
image
Engineering, 04.07.2019 18:10, alyssabailey7545
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Do you know the correct answer?
At high altitudes, mountaineers cannot absorb a sufficient amount of O2 in your flows blood to maint...

Questions in other subjects:

Konu
Mathematics, 19.05.2020 20:58
Konu
Mathematics, 19.05.2020 20:58
Konu
Mathematics, 19.05.2020 20:58