Engineering, 18.04.2020 02:46, dayantapia2007

A rigid, well-insulated tank contains a mixture of liquid-vapor (2 phase) Ammonia.

There is 0.0025 ft3 of saturated liquid and 1.5 ft3 of saturate vapor, initially at 40 psi. A

paddle wheel stirs the mixture until only saturated vapor at higher pressure remains in the

tank. KE and PE can be considered negligible. Taking the Ammonia as the system,

determine the amount of energy that has been transferred by work in Btu.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, oliviasoreo92

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

continue

Engineering, 04.07.2019 18:20, ashleyjaslin

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

continue

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

Engineering, 04.07.2019 19:10, gabigalvis1091

What is the main objective of using reheat rankine cycle?

Answers: 3

continue

Do you know the correct answer?

A rigid, well-insulated tank contains a mixture of liquid-vapor (2 phase) Ammonia.

There...