Engineering, 17.04.2020 02:12, cheath104
Blocks A and B have a mass of 15 kg and 25 kg, respectively. If B slides on the surface for which µk = 0.4 has a velocity of 15 m/s when S=7m from A. If the unstretched spring has a stiffness k = 1200 N/m, determine the maximum compression of the spring due to the collision. Take e = 0.80.
Answers: 1
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10, genyjoannerubiera
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 19:10, jrcspiderman2003
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
Blocks A and B have a mass of 15 kg and 25 kg, respectively. If B slides on the surface for which µk...
Physics, 29.08.2019 14:00
Mathematics, 29.08.2019 14:10
Geography, 29.08.2019 14:10