Engineering, 16.04.2020 20:08, kingsavage2002
The mechanical properties of a metal may be improved by incorporating fine particles of its oxide. Given that the moduli of elasticity of the metal and oxide are, respectively, 60 GPa and 380 GPa, what is the (a) upper-bound, and (b) lower-bound modulus of elasticity values (in GPa) for a composite that has a composition of 33 vol% of oxide particles. (a) GPa (b) GPa
Answers: 2
Engineering, 04.07.2019 18:20, hayleymckee
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 19:10, batmanmarie2004
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
Engineering, 06.07.2019 03:20, cherkaouinazihp387bk
Figure out the odd statement about ceramics in the following (a) good insulators of heat and electricity (b) usually less desire than metals (c) ductile in nature (d) contains both metallic and nonmetallic elements
Answers: 3
Engineering, 06.07.2019 04:20, coolstacie
What is the fuid acceleration in vector form for the following velocity field? note i, j, and k are unit vectors. show all of your work.
Answers: 1
The mechanical properties of a metal may be improved by incorporating fine particles of its oxide. G...
Mathematics, 29.09.2020 01:01
Biology, 29.09.2020 01:01
History, 29.09.2020 01:01