6. You are given a 3-bit full adder, and several 2-to-1 multiplexers. Suppose A is a 3-bit input number. Design a circuit that can perform the following operations based on a 2-bit control code S1 S0. Ignore any overflow problem. Show clearly how the control signals S1 and S0 are used. Make your design as simple as possible.

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.