Engineering
Engineering, 16.04.2020 17:51, lakinbacon4

A distillation sieve-tray tower is being used to distill a hydrocarbon feed. The vapor flow rate at the tower bottom is 21 000 kg/hr and the liquid flow rate is 19 500 kg/hr. The density of the liquid rhoL = 673 kg/m3 and rhoV = 3.68 kg/m3. Assume a tray spacing of 24 in. (0.610 m). Calculate the tower diameter assuming the tower operates at 80% of flooding. Assume σ = 22.5 dyn/cm.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, anna22684
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
image
Engineering, 04.07.2019 18:10, demarcuswiseman
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
image
Engineering, 04.07.2019 19:10, pjgolden04
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
image
Engineering, 04.07.2019 19:20, justicehernandez
Acarnot refrigerator operates in a room in which the temperature is 21°c and of power when operating. if the food compartment of the refrigerator is consumes 3 kw to be maintained at 2°c, determine (a) the coefficient of performance of the cycle and (b) the rate of heat removal from the food compartment. refrigerator cycle that has a higher coefficient of performance than that of the discussed (e) is it possible to develop a carn ot refrigerator, operating between the same temperature limits? explain
Answers: 2
Do you know the correct answer?
A distillation sieve-tray tower is being used to distill a hydrocarbon feed. The vapor flow rate at...

Questions in other subjects: