Engineering, 16.04.2020 04:18, Sillydork7853

An 8-in-diameter grinding wheel rotates at a surface speed of 4000 ft/min in a surface grinding job performed on a flat piece of 4340 steel with hardness = 325 BHN. There are 300 active grits/in2 of wheel surface, and the operation is performed dry. Infeed = 0.0015 in per pass, crossfeed (transverse feed) = 0.20 in, and the reciprocating speed of the work is 30 ft/min. Determine (a) length of contact between the wheel and the work, (b) volume rate of metal removed, (c) number of chips formed per unit time, and (d) average volume per chip? (e) If the tangential cutting force on the workpiece = 23 lb., what is the specific energy U calculated for this job?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, aliceohern

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:10, salazjlove

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Answers: 1

continue

Engineering, 04.07.2019 18:10, wirchakethan23

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

continue

Do you know the correct answer?

An 8-in-diameter grinding wheel rotates at a surface speed of 4000 ft/min in a surface grinding job...