Engineering
Engineering, 16.04.2020 04:04, sumayyahjj

Isye 6501 Analytics-Success-Stories (among others) contain brief overviews of some major Analytics success stories. In this course project, your job is to think carefully about what analytics models and data might have been required. (1) Browse the short overviews of the projects. Read a bunch of them – they’re really interesting. But don’t try to read them all unless you have a lot of spare time; there are lots! (2) Pick a project for which you think at least three different Analytics models might have been combined to create the solution. (3) Think carefully and critically about what models might be used to create the solution, how they would be combined, what specific data might be needed to use the models, how it might be collected, and how often it might need to be refreshed and the models re-run. DO NOT find a description online (or elsewhere) of what the company or organization actually did. I want this project to be about your ideas, not about reading what someone else did. (4) Write a short report describing your answers to (3).

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, makaylashrout77
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
image
Engineering, 04.07.2019 18:10, skpdancer1605
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
image
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
image
Engineering, 04.07.2019 18:10, siri5645
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
Do you know the correct answer?
Isye 6501 Analytics-Success-Stories (among others) contain brief overviews of some major Analytics s...

Questions in other subjects:

Konu
Physics, 03.06.2021 14:00
Konu
English, 03.06.2021 14:00
Konu
History, 03.06.2021 14:00